Airstream Restoration of Scott and Kathy's 1955 Flying Cloud Whale Tail - Our California Vintage Airstream.
Showing posts with label Vintage Trailer Supply. Show all posts
Showing posts with label Vintage Trailer Supply. Show all posts

Thursday, March 26, 2015

Beautiful Back End!

The new rear hatch door with a new 1950's reproduction Airstream name plate from Vintage Trailer Supply is installed.  I'm so glad for the custom hinges that Colin built for us.  More holes were cut into the shell, these are for the housings to hold the tail lights.

Thursday, January 30, 2014

Double Draining - Planning the Bathroom Drains

We don't use a lot of water in our 2008 Airstream, we can go without a fresh water fill up for at least 5 days.  And I expect that our water use will remain the same for our 1955 vintage Airstream.
We do need a larger water tank than the missing original fresh tank that fit under the cabinet under the front window.

We are taking advantage of Vintage Trailer Supply's standardized water tanks, positioning the two tanks below the floor in between the frame rails.  Plumbing the fresh tanks in tandem will work really well for us.  The tandem gray tanks will hold the same amount of water, reducing the possibility of overflow which I really want to avoid!

Putting the tanks into their spots in the frame rails.












Close-up of the tank straps covered with a peel-and-stick waterproof membrane.












The street-side plumbing is for the bathroom lavatory sink and the shower drains.  They join together to drain into the new grey tanks.  Back in 1955 Airstream and other trailers did not have holding tanks for water coming from the sinks and shower, and water was just dumped on the ground.  Not very sanitary, and so I'm glad to upgrade our Flying Cloud.












 Cutting the cross members for the tandem tank fittings.



 











The cross members ready for the tank connector. Note: the step was painted with the gray topcoat over the POR15 rustproof paint.

Saturday, January 25, 2014

Strapping Tanks

Below the floor, will be two gray water tanks, and also 2 fresh water tanks.  These are standard 16 gallon tanks, now available at Vintage Trailer Supply - saves lots of money!  The metal straps, fabricated by Colin Hyde,  will keep the tanks secured in between the main rails.








UPDATE 2/6/2014 -  Colin Hyde's reply to Gary's question.

I have a 55 Flying Cloud also. I'm in the process of installing the water tanks now. Why do the straps have a loop in them? They don't have a "loop" in them. They are formed like a "C" with short legs on either end. This allows us to install the bolts longitudinally instead of vertically, causing protrusions in the bellypan. It also allows us to put tension on the straps.  How are they secured on the topside (is it just pressure against the bottom of the floor)? The tanks are up against the underside of the floor & foam blocks minimize lateral movement. 
Coli

Monday, October 1, 2012

Frame was 3" - Now 4" Deep - Or is it???

Prior to 1955 Vintage Airstream Frames were 3" deep.
The change to a stronger 4" frame was started in 1955.
Unfortunately, our Flying Cloud was manufactured in California with the 3" frame.  Our gray water and fresh water tanks from Vintage Trailer Supply are 4" deep.  As planned - to fit the tanks into the frame, Colin Hyde changed our frame to be 4" deep.

The longer frame will allow us to add a bumper trunk also.
With the small angle cut from the frame, the 3" bumper remains the original depth!
Welded closed, this also prevents water from sitting inside the frame causing rust.
And eliminates a way for mice and other critters to enter the trailer.

In 1955 and many other years, Airstream built trailers with  no rear cross member.  So the plywood floor was not directly supported by the frame, rather the floor was cantilevered from the next forward cross member.  And the plywood was originally attached through the C-Channel only to the aluminum shell.  
No wonder that attaching accessories to the back of an Airstream is a bad idea.  Spare tires, generators, even bike racks should not be attached to the trailer rear without significant frame work.
Colin beefed up our structure by adding a rear cross-member.  The aluminum shell, plywood floor, C-Channel, and shell will all be securely attached together with elevator bolts.
 
 
 
Rotisserie!
The front hold-down plate was removed, but will be replaced.  The hold down plate strengthens the connection of the frame to shell at the higher stress front area.



Tuesday, April 24, 2012

Shell Off - Frame Off - Axle Off!!!

The shell is separated from the frame!
Although our vintage airstream is still being deconstructed, this seems like such huge progress!! 
 

 

Above is the top of the floor with the parquet wood flooring that covered all the floor rot.  Below the photo is of the bottom of the subfloor - with all the rotted edges.
 

 The old axle with leaf springs is coming off - to be replaced with a torsion axle for a smoother kinder ride for our 1955 Airstream Flying Cloud.
The great news is that the tire fits into the "A" portion of the frame.  The new fresh water tanks will not fit into the angled main frame rails.  The change will give us the 2 tanks at 17 gallons each - for a total of 34 gallons of fresh water up front and capacity for 34 gallons of gray water.  These are the new Vintage Trailer Supply tanks - item # VTS-851.

Thursday, January 7, 2010

Bedroom - Sans Mattress


I understand that removing the mattresses before I saw the interior was the best favor that will ever be done for me. Thank you Colin!

With the reading material storage, this will need to be my bed!

Vintage Trailer Supply sells Restoration-Quality Locker Hardware. These are silver-colored, which are not yet available. I will need to ask Steve if these are coming soon - I hope so!