Airstream Restoration of Scott and Kathy's 1955 Flying Cloud Whale Tail - Our California Vintage Airstream.
Showing posts with label Axle. Show all posts
Showing posts with label Axle. Show all posts

Wednesday, February 5, 2014

Almost Mobile - Axle Mounted


For softer travel and longevity of our vintage Airstream, we changed from the original leaf spring axles to torsion axles.

The center belly pan is prepared and positioned for rivets.









The new torsion axles are mounted.












 The axles are bolted onto the mounting plates, and the brakes are wired.












Trailer shocks were installed, attached to the shock mounts in the wheel well.  This photo shows the street-side wheel well that was reshaped with an adjusted offset for room for the toilet.

Tuesday, January 28, 2014

Floor Attached to Frame!

Construction!
No longer pulling things apart!
All the preparation work is complete, things are going back together again, and I could not be any happier!!

The old leaf spring axle is gone, white the new smoother riding torsion axle is positioned and the bracket is attached to the frame.
















Glue is used to attach the plywood floor is to the frame.














Elevator bolts are used by the Airstream factory to attach the C-Channel to the outriggers only - so they are spaced widely apart, approximately every 2 feet.  Then the factory used (uses) self taping screws are used to attach the C-Channel to the plywood between the outriggers.  
Our 1955 Flying Cloud has Colin's added strength by using elevator bolts inside the C-channel - all along the C-Channel to more securely attach the frame to the floor and therefore lessen stress to the trailer.  The elevator bolts are attached to the outriggers and to the plywood floor.  Colin used self-taping screws to further secure the plywood floor to the outriggers and the cross members.
Improved again!  Even the curves are attached with elevator bolts - every 8" to 10".












Using the rotisserie, our Airstream is moved to comfortable positions for securely bolting the floor and chassis together. Shown with the hold-down plate welded to the front of the frame.  The extra elevator bolts are best seen in the photo from the under-side of the plywood floor.










Friday, September 24, 2010

Any Spring Left in these Leaf Springs

Our leaf springs and axle will be updated to a better riding torsion axle.