Airstream Restoration of Scott and Kathy's 1955 Flying Cloud Whale Tail - Our California Vintage Airstream.
Showing posts with label Shower Pan. Show all posts
Showing posts with label Shower Pan. Show all posts

Friday, January 31, 2014

Adding Grey Tanks - First in 58 Years! Part 2

At Colin Hyde Trailer Restorations, Reid has been working on our plumbing - thanks Reid!

The bathroom lavatory sink and shower join to drain down to the first (forward) tandem grey tan.
 First checking the fit of all parts before they are attached/glued together permanently


 









Adding gray tanks to our vintage Airstream for the first time in 58 years! 
During travel, trailers move and flex.  While it is not legal or safe to ride in a moving trailer, someday I'd like to get a video set up to see the movement that happens.  The movement can break areas that are too stiff.  To be sure that our tandem tanks maintain a secure and dry connection, a flexible link is added between grey the two tanks.  Thick rigid foam insulation is added to further protect the link and will keep the tanks from shifting forward and backward within the frame.  A similar link will be added to the tandem fresh water tanks.


 









From the back of the rear grey tank, the used water will exit the trailer through the combination black and gray water valve.  Unlike modern trailers, the dump valve will not hang below the belly pan.  I just realized I have very few photos showing our dump valve - just not photogenic!   Because in 1955 we had no dump valve, our Flying Cloud valve handle will not show on the exterior of the trailer. The valve handle will be accessible through a hatch in the belly pan.  This decision will also keep our restoration with the beautiful clean design of 1955.


 








Both the fresh & grey water tanks with plumbing connections.
  
The portions of the frame that are cut out for the plumbing connections - all will be strong!  Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge.  The bolts will allow access to the plumbing if needed at a later date.


 








The shower pan's drain trap will fit inside the frame, hidden by the belly pan.



Wednesday, January 29, 2014

Position the Plumbing and Narrow the Wheel Well

I need a shower and we also want to keep the living space as open as possible so we need to crowd the bathroom.  Before when we checked the fit, there is very little room between the toilet and the wheel wheel. 

 As new plywood is cut for a floor, the size and shape of the trailer can tweak a little bit.  Now our 1955 Flying Cloud final size of the Airstream is defined by the floor attached to the chassis.  With the wheel wells attached between the plywood and the frame, the bathroom plumbing needed to be double checked. 

Axle and tires on, the chassis is flipped over.













Great news!  The shell still fits on the floor/frame!












Next the plumbing parts are laid out in their approximate positions.














The mock-up wall is brought back into our trailer to check the fit.
















With the new axle and tire in place, we could check that all would still fit, and as expected the wheel well needed to be slightly adjusted.

Sunday, January 26, 2014

Location, Position, Check, and Double Check

I'm so excited!  We are getting closer to putting the aluminum shell back onto the frame!

Wheel well is located close to the shower pan.  Both locations are finalized and the shower pan is checked to fit and be supported by the cross members. 












To keep water from damaging our new floor, the plywood is sealed or waterproofed.  Colin uses Smiths CPES Penetrating Epoxy 2 part epoxy.  The underside is soaked and the upper side is sealed at the outer edges of each board.










 













The C-Channel will hold the wall and provides the stability and contact between the wall and the wood floor and chassis below. 












The curved C-Channel for the front and rear corners was made in 1955 by Airstream in small segments. Colin fabricated new C-Channels from 032 aka 50/50 aluminum "belly pan" aluminum.
Then the C-Channel is positioned on the floor, checking the fit again.