The new rear hatch door with a new 1950's reproduction Airstream name plate from Vintage Trailer Supply is installed. I'm so glad for the custom hinges that Colin built for us. More holes were cut into the shell, these are for the housings to hold the tail lights.
Airstream Restoration of Scott and Kathy's 1955 Flying Cloud Whale Tail - Our California Vintage Airstream.
Showing posts with label Vintage Airstream. Show all posts
Showing posts with label Vintage Airstream. Show all posts
Thursday, March 26, 2015
Thursday, February 13, 2014
Galvanic Corrosion - Hinge Patch Solution
To work on our door, it was removed from the shell, exposing hidden galvanic corrosion. The aluminum and steel support behind the upper hinge were both badly damaged. Repairs will be done in place as we are not replacing the upper curb side panel, and there is no other reason to remove the aluminum skin.
A patch was cut and laid inside the wall, positioned with cleco fasteners.
Inside the wall, a thick aluminum patch is bent on one side and is securely attached to the supporting aluminum wall stud.
The hinge is positioned onto the new aluminum patch before it is riveted.
A patch was cut and laid inside the wall, positioned with cleco fasteners.
Inside the wall, a thick aluminum patch is bent on one side and is securely attached to the supporting aluminum wall stud.
The hinge is positioned onto the new aluminum patch before it is riveted.
Labels:
Aluminum,
Cleco,
Corrosion,
Door-In-A-Door,
Exterior,
Hinge,
Improvement,
Vintage Airstream
Location:
Peru, NY 12972, USA
Saturday, February 8, 2014
Can Do! New Tool for Custom Airstream Louvers
Colin Hyde Trailer Restorations now can make restoration louver panels!!
Colin even designed the press base in honor of his shop - the "C" shape!
The new tool will restore vintage airstream water heater access panels, refrigerator panels, or even furnace panels. It will allow a floor-plan layout to be changed to fit more current needs.
Or new panels can be custom designed and manufactured where none before existed.
The panels can be used to cover holes in the shell and tastefully camouflage of aluminum damage.
Testing the tool - super neat!
Colin even designed the press base in honor of his shop - the "C" shape!
The new tool will restore vintage airstream water heater access panels, refrigerator panels, or even furnace panels. It will allow a floor-plan layout to be changed to fit more current needs.
Or new panels can be custom designed and manufactured where none before existed.
The panels can be used to cover holes in the shell and tastefully camouflage of aluminum damage.
Testing the tool - super neat!
Tuesday, February 4, 2014
Security, Secured, and Structurally Sound - Spare Tire
Back in the day, there was no spare tire holder on the 1955 Airstream trailers.
Some owners carried their tires in their tow vehicles, or drove without the security of having an extra Airstream tire. Some owners added tires to the back of their trailer with or without the option of aluminum wheel covers. Without carefully planned extra reinforcement of the frame, the added spare tire has caused troubles. Sadly, the extra weight at the back of the trailer can cause more movement and bounce in the back of the trailer.
As I understand this: The trailer is like a child's see-saw or teeter totter. The axle and tires is the fulcrum point, while the front and rear of the trailer can move up and down. The front of the trailer has a more limited range of travel as it is attached to the tow vehicle by the hitch. I wrote earlier about front end separation. Movement in rear of the trailer occurs as there is nothing to minimized the bounce. So by adding a spare tire to the rear, the extra weight causes a wider range of movement. The stress of the movement can cause the shell and chassis to separate - the dreaded rear end separation.
Fortunately, our 1955 Flying Cloud was not subjected to this abuse!
Our spare tire will be held at the front of the trailer, consistently adding to the hitch weight. The aluminum covering the front cross member, steel frame and plywood floor is riveted into place.
Some owners carried their tires in their tow vehicles, or drove without the security of having an extra Airstream tire. Some owners added tires to the back of their trailer with or without the option of aluminum wheel covers. Without carefully planned extra reinforcement of the frame, the added spare tire has caused troubles. Sadly, the extra weight at the back of the trailer can cause more movement and bounce in the back of the trailer.
As I understand this: The trailer is like a child's see-saw or teeter totter. The axle and tires is the fulcrum point, while the front and rear of the trailer can move up and down. The front of the trailer has a more limited range of travel as it is attached to the tow vehicle by the hitch. I wrote earlier about front end separation. Movement in rear of the trailer occurs as there is nothing to minimized the bounce. So by adding a spare tire to the rear, the extra weight causes a wider range of movement. The stress of the movement can cause the shell and chassis to separate - the dreaded rear end separation.
Fortunately, our 1955 Flying Cloud was not subjected to this abuse!
Our spare tire will be held at the front of the trailer, consistently adding to the hitch weight. The aluminum covering the front cross member, steel frame and plywood floor is riveted into place.
Labels:
A-Frame,
Aluminum,
Improvement,
Spare Tire,
Vintage Airstream
Monday, February 3, 2014
Belly Pan - Panels to Access Plumbing
Colin worked with us to determine the best way to have an Airstream that looks vintage, and still has the modern conveniences that we will use to make our life comfortable.
The curb side and street side belly pan panels are riveted - using the larger belly pan rivets.
Situated in the belly pan, the combination grey water and black water dump valve will be accessible through an access panel on the street side belly panel. The second access panel will allow maintenance on the grey and black water drain pipes, if needed, without cutting open the belly pan.
Using 5052 Aluminum at 032 thick, another street side panel provides maintenance access to the bathroom lavatory sink and shower drains. While we've never had troubles with our 2008 Airstream's plumbing, we have worked on home plumbing a few times. The panels will make any work much easier. Insulated with Reflextix.
The curb side and street side belly pan panels are riveted - using the larger belly pan rivets.
Situated in the belly pan, the combination grey water and black water dump valve will be accessible through an access panel on the street side belly panel. The second access panel will allow maintenance on the grey and black water drain pipes, if needed, without cutting open the belly pan.
Using 5052 Aluminum at 032 thick, another street side panel provides maintenance access to the bathroom lavatory sink and shower drains. While we've never had troubles with our 2008 Airstream's plumbing, we have worked on home plumbing a few times. The panels will make any work much easier. Insulated with Reflextix.
Labels:
Aluminum,
Belly Pan,
Black Water Tank,
Colin Hyde Trailer Restorations,
Drain,
Gray Water Tanks,
Improvement,
Insulation,
Lavatory,
Plumbing,
Rivet,
Shower,
Vintage Airstream
Location:
Peru, NY 12972, USA
Belly Pan - Adding Aluminum Curbside
There was so much work done - today I've made
Colin's guys completed our belly pan installation!!
All the aluminum for the belly pan sides is bent into a curve to closely match the frame's outriggers. Bending the belly pan sides is done with a PVC pipe before the aluminum is installed. I like looking in the background of the photos that Colin sends to see what other projects are in progress at Colin Hyde Trailer Restorations.
The aluminum is positioned over the anti-chaffing strips at the end of the outriggers.
Clecos are use to position the curbside belly pan before riveting.
Labels:
Aluminum,
Belly Pan,
Cleco,
Insulation,
Vintage Airstream
Belly Pan - Streetside
The belly pan installation is proceeding - the 5052 aluminum street side panels are positioned. For more information on the pre-bent aluminum - listen to Episode 202 of the Vintage Airstream Podcast.
So very cool - so I'm posting lots of photos...
So very cool - so I'm posting lots of photos...
Location:
Peru, NY 12972, USA
Sunday, February 2, 2014
Belly Pan - All Curved Corners
A new belly pan is being attached to our vintage Airstream frame!
Our shell-off vintage Airstream restoration at this time looks like 2 completely different projects.
The shell was polished and we need to make a decision about which panel or panels to replace.
And our chassis is getting close to being completely done - so exciting!!
Cuts in the aluminum for the corner construction is very familiar to me. It looks like fabric clipped to ease a concave curve.
Because we added a space for a spare tire under the frame, the belly pan is installed in a few more panels. Just so I don't forget - the belly pan aluminum is not the same as used on the sides of Airstreams. The belly pan is made of 505 032 thick.
The cleco fasteners are holding the rear street-side panel in place before it is riveted. Cleco is a newer tool for me, so I googled the word to find out it is also spelled cleko.
Our shell-off vintage Airstream restoration at this time looks like 2 completely different projects.
The shell was polished and we need to make a decision about which panel or panels to replace.
And our chassis is getting close to being completely done - so exciting!!
Cuts in the aluminum for the corner construction is very familiar to me. It looks like fabric clipped to ease a concave curve.
Because we added a space for a spare tire under the frame, the belly pan is installed in a few more panels. Just so I don't forget - the belly pan aluminum is not the same as used on the sides of Airstreams. The belly pan is made of 505 032 thick.
The cleco fasteners are holding the rear street-side panel in place before it is riveted. Cleco is a newer tool for me, so I googled the word to find out it is also spelled cleko.
Saturday, February 1, 2014
Warming Up - Insulating the Belly Pan
Reflectix reflective insulation is cut to fit under the plywood floor between the frame rails including above the water tanks. It will also be used to insulate under the water tanks.
Note: The step is painted with a UV resistant topcoat over the black POR 15.
The visible portions of the rails will topcoat painted soon.
The portions of the frame that are cut out for the plumbing connections - all will be strong! Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge. The bolts will allow access to the plumbing if needed at a later date.
The dump valve is installed & valve handles extended through the main rail into an are that will be accessible through a flip down hatch.
Gray tanks installed!
Fiberglass Insulation to really keep us warm!
The end of the cross members have the added anti-chaffing strips.
First piece of the belly pan is cut!!!! We are moving forward again!
Note: The step is painted with a UV resistant topcoat over the black POR 15.
The visible portions of the rails will topcoat painted soon.
The portions of the frame that are cut out for the plumbing connections - all will be strong! Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge. The bolts will allow access to the plumbing if needed at a later date.
The dump valve is installed & valve handles extended through the main rail into an are that will be accessible through a flip down hatch.
Gray tanks installed!
Fiberglass Insulation to really keep us warm!
First piece of the belly pan is cut!!!! We are moving forward again!
Labels:
1955,
Belly Pan,
Drain,
Dump Valve,
Floor,
Flying Cloud,
Frame,
Fresh Water Tank,
Gray Water Tanks,
Improvement,
Insulation,
Plumbing,
POR15,
Reflectix,
Vintage Airstream
Location:
Peru, NY 12972, USA
Friday, January 31, 2014
Adding Grey Tanks - First in 58 Years! Part 2
At Colin Hyde Trailer Restorations, Reid has been working on our plumbing - thanks Reid!
The bathroom lavatory sink and shower join to drain down to the first (forward) tandem grey tan.
First checking the fit of all parts before they are attached/glued together permanently
Adding gray tanks to our vintage Airstream for the first time in 58 years!
During travel, trailers move and flex. While it is not legal or safe to ride in a moving trailer, someday I'd like to get a video set up to see the movement that happens. The movement can break areas that are too stiff. To be sure that our tandem tanks maintain a secure and dry connection, a flexible link is added between grey the two tanks. Thick rigid foam insulation is added to further protect the link and will keep the tanks from shifting forward and backward within the frame. A similar link will be added to the tandem fresh water tanks.
From the back of the rear grey tank, the used water will exit the trailer through the combination black and gray water valve. Unlike modern trailers, the dump valve will not hang below the belly pan. I just realized I have very few photos showing our dump valve - just not photogenic! Because in 1955 we had no dump valve, our Flying Cloud valve handle will not show on the exterior of the trailer. The valve handle will be accessible through a hatch in the belly pan. This decision will also keep our restoration with the beautiful clean design of 1955.
Both the fresh & grey water tanks with plumbing connections.
The portions of the frame that are cut out for the plumbing connections - all will be strong! Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge. The bolts will allow access to the plumbing if needed at a later date.
The shower pan's drain trap will fit inside the frame, hidden by the belly pan.
The bathroom lavatory sink and shower join to drain down to the first (forward) tandem grey tan.
First checking the fit of all parts before they are attached/glued together permanently
Adding gray tanks to our vintage Airstream for the first time in 58 years!
During travel, trailers move and flex. While it is not legal or safe to ride in a moving trailer, someday I'd like to get a video set up to see the movement that happens. The movement can break areas that are too stiff. To be sure that our tandem tanks maintain a secure and dry connection, a flexible link is added between grey the two tanks. Thick rigid foam insulation is added to further protect the link and will keep the tanks from shifting forward and backward within the frame. A similar link will be added to the tandem fresh water tanks.
From the back of the rear grey tank, the used water will exit the trailer through the combination black and gray water valve. Unlike modern trailers, the dump valve will not hang below the belly pan. I just realized I have very few photos showing our dump valve - just not photogenic! Because in 1955 we had no dump valve, our Flying Cloud valve handle will not show on the exterior of the trailer. The valve handle will be accessible through a hatch in the belly pan. This decision will also keep our restoration with the beautiful clean design of 1955.
Both the fresh & grey water tanks with plumbing connections.
The portions of the frame that are cut out for the plumbing connections - all will be strong! Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge. The bolts will allow access to the plumbing if needed at a later date.
The shower pan's drain trap will fit inside the frame, hidden by the belly pan.
Thursday, January 30, 2014
Double Draining - Planning the Bathroom Drains
We don't use a lot of water in our 2008 Airstream, we can go without a fresh water fill up for at least 5 days. And I expect that our water use will remain the same for our 1955 vintage Airstream.
We do need a larger water tank than the missing original fresh tank that fit under the cabinet under the front window.
We are taking advantage of Vintage Trailer Supply's standardized water tanks, positioning the two tanks below the floor in between the frame rails. Plumbing the fresh tanks in tandem will work really well for us. The tandem gray tanks will hold the same amount of water, reducing the possibility of overflow which I really want to avoid!
Putting the tanks into their spots in the frame rails.
Close-up of the tank straps covered with a peel-and-stick waterproof membrane.
The street-side plumbing is for the bathroom lavatory sink and the shower drains. They join together to drain into the new grey tanks. Back in 1955 Airstream and other trailers did not have holding tanks for water coming from the sinks and shower, and water was just dumped on the ground. Not very sanitary, and so I'm glad to upgrade our Flying Cloud.
Cutting the cross members for the tandem tank fittings.
The cross members ready for the tank connector. Note: the step was painted with the gray topcoat over the POR15 rustproof paint.
We do need a larger water tank than the missing original fresh tank that fit under the cabinet under the front window.
We are taking advantage of Vintage Trailer Supply's standardized water tanks, positioning the two tanks below the floor in between the frame rails. Plumbing the fresh tanks in tandem will work really well for us. The tandem gray tanks will hold the same amount of water, reducing the possibility of overflow which I really want to avoid!
Putting the tanks into their spots in the frame rails.
Close-up of the tank straps covered with a peel-and-stick waterproof membrane.
The street-side plumbing is for the bathroom lavatory sink and the shower drains. They join together to drain into the new grey tanks. Back in 1955 Airstream and other trailers did not have holding tanks for water coming from the sinks and shower, and water was just dumped on the ground. Not very sanitary, and so I'm glad to upgrade our Flying Cloud.
Cutting the cross members for the tandem tank fittings.
The cross members ready for the tank connector. Note: the step was painted with the gray topcoat over the POR15 rustproof paint.
Wednesday, January 29, 2014
Position the Plumbing and Narrow the Wheel Well
I need a shower and we also want to keep the living space as open as possible so we need to crowd the bathroom. Before when we checked the fit, there is very little room between the toilet and the wheel wheel.
As new plywood is cut for a floor, the size and shape of the trailer can tweak a little bit. Now our 1955 Flying Cloud final size of the Airstream is defined by the floor attached to the chassis. With the wheel wells attached between the plywood and the frame, the bathroom plumbing needed to be double checked.
Axle and tires on, the chassis is flipped over.
Great news! The shell still fits on the floor/frame!
Next the plumbing parts are laid out in their approximate positions.
The mock-up wall is brought back into our trailer to check the fit.
With the new axle and tire in place, we could check that all would still fit, and as expected the wheel well needed to be slightly adjusted.
As new plywood is cut for a floor, the size and shape of the trailer can tweak a little bit. Now our 1955 Flying Cloud final size of the Airstream is defined by the floor attached to the chassis. With the wheel wells attached between the plywood and the frame, the bathroom plumbing needed to be double checked.
Axle and tires on, the chassis is flipped over.
Great news! The shell still fits on the floor/frame!
Next the plumbing parts are laid out in their approximate positions.
The mock-up wall is brought back into our trailer to check the fit.
With the new axle and tire in place, we could check that all would still fit, and as expected the wheel well needed to be slightly adjusted.
Labels:
Black Water Tank,
Chassis,
Mock-Up,
Plumbing,
Rotisserie,
Shell,
Shower Pan,
Toilet,
Vintage Airstream,
Water Pump,
Wheel Well
Location:
Peru, NY 12972, USA
Subscribe to:
Posts (Atom)
.jpeg)
+Upper+Hinge+Removed+to+Reveal+Galvanic+Corrosion.jpg)
+Upper+Hinge+Removed+to+Reveal+Galvanic+Corrosion.jpg)
+Hinge+Patch+Ready+to+Rivet.jpg)
+Hinge+Patch+Inside+Wall+Thick+Aluminum+Attached+to+Wall+Stud.jpg)

+Testing+Louver+Press+-+1st+Test.jpg)
+Testing+Louver+Press+-+1st+Test.jpg)
+Testing+Louver+Press+-+1st+Test.jpg)
+Testing+Louver+Press+-+1st+Test+Press+-+1st+Test.jpg)
+Testing+Louver+Press+-+1st+Test.jpg)
+Front+crossmember+trim+cover.jpg)
+Perimeter+belly+pan+panels+riveted.jpg)
+Service+Panel+for+Dump+Valve+and+Access+to+Dump+Valve+Handle.jpg)
+Shower+Service+Panel+for+Shower+and+Lavatory+Sink+Drain+Trap.jpg)

+Pre-bent+bellypan+sides+ready+for+installation.jpg)
+Bellypan+side+installation.jpg)
+Rear+Curb+Side+corner+&+side+with+clecos.jpg)
+Front+Curb+Side+bellypan+sides+ready+for+rivets.jpg)
+Belly+Pan+Curbside+Rivet+Ready.jpg)
+Belly+Pan+Installation+Street+Side.jpg)
+Belly+Pan+Installation+Street+Side.jpg)
+Belly+Pan+Installation+Street+Side.jpg)
+Belly+Pan+Installation+Street+Side.jpg)

+Belly+Pan+Aluminum+Front+Corners.jpg)

+Prefitting+Reflectix+in+frame+-+Step+painted+over+the+POR15.jpg)
+Dump+valve+installed.jpg)
+Grey+tank+final+installation.jpg)
+Fiberglass+insulation+installation.jpg)
+Insulation+installation.jpg)

+Bathroom+sink+&+shower+drain+to+grey+tanks.jpg)
+Flexible+link+between+grey+tanks+and+foam+insulation+to+keep+the+tanks+from+shifting.jpg)
+Black+and+gray+tank+dump+valve+accessible+through+a+belly+pan+hatch.jpg)
+web.jpg)
+Fresh+&+grey+water+tanks+pre-fitted.jpg)
+Shower+drain+trap+will+fit+inside+the+belly+pan.jpg)
.jpg)
.jpg)
.jpg)
+compressed.jpg)
+compressed.jpg)

+compressed.jpg)
+compressed.jpg)
+compressed.jpg)
+compressed.jpg)
+compressed.jpg)
+compressed.jpg)

+compressed.jpg)
+compressed.jpg)
+compressed.jpg)