Airstream Restoration of Scott and Kathy's 1955 Flying Cloud Whale Tail - Our California Vintage Airstream.
Showing posts with label Dump Valve. Show all posts
Showing posts with label Dump Valve. Show all posts

Saturday, February 1, 2014

Warming Up - Insulating the Belly Pan

Reflectix reflective insulation is cut to fit under the plywood floor between the frame rails including above the water tanks.   It will also be used to insulate under the water tanks.
Note:  The step is painted with a UV resistant topcoat over the black POR 15.
The visible portions of the rails will topcoat painted soon. 

The portions of the frame that are cut out for the plumbing connections - all will be strong!  Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge.  The bolts will allow access to the plumbing if needed at a later date.


 









The dump valve is installed & valve handles extended through the main rail into an are that will be accessible through a flip down hatch.


 












 Gray tanks installed!


 









Fiberglass Insulation to really keep us warm! 

The end of the cross members have the added anti-chaffing strips.
First piece of the belly pan is cut!!!!  We are moving forward again!

Friday, January 31, 2014

Adding Grey Tanks - First in 58 Years! Part 2

At Colin Hyde Trailer Restorations, Reid has been working on our plumbing - thanks Reid!

The bathroom lavatory sink and shower join to drain down to the first (forward) tandem grey tan.
 First checking the fit of all parts before they are attached/glued together permanently


 









Adding gray tanks to our vintage Airstream for the first time in 58 years! 
During travel, trailers move and flex.  While it is not legal or safe to ride in a moving trailer, someday I'd like to get a video set up to see the movement that happens.  The movement can break areas that are too stiff.  To be sure that our tandem tanks maintain a secure and dry connection, a flexible link is added between grey the two tanks.  Thick rigid foam insulation is added to further protect the link and will keep the tanks from shifting forward and backward within the frame.  A similar link will be added to the tandem fresh water tanks.


 









From the back of the rear grey tank, the used water will exit the trailer through the combination black and gray water valve.  Unlike modern trailers, the dump valve will not hang below the belly pan.  I just realized I have very few photos showing our dump valve - just not photogenic!   Because in 1955 we had no dump valve, our Flying Cloud valve handle will not show on the exterior of the trailer. The valve handle will be accessible through a hatch in the belly pan.  This decision will also keep our restoration with the beautiful clean design of 1955.


 








Both the fresh & grey water tanks with plumbing connections.
  
The portions of the frame that are cut out for the plumbing connections - all will be strong!  Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge.  The bolts will allow access to the plumbing if needed at a later date.


 








The shower pan's drain trap will fit inside the frame, hidden by the belly pan.