Warming Up - Insulating the Belly Pan

Reflectix reflective insulation is cut to fit under the plywood floor between the frame rails including above the water tanks.   It will also be used to insulate under the water tanks.
Note:  The step is painted with a UV resistant topcoat over the black POR 15.
The visible portions of the rails will topcoat painted soon. 

The portions of the frame that are cut out for the plumbing connections - all will be strong!  Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge.  The bolts will allow access to the plumbing if needed at a later date.

 









The dump valve is installed & valve handles extended through the main rail into an are that will be accessible through a flip down hatch.

 












 Gray tanks installed!

 









Fiberglass Insulation to really keep us warm! 

The end of the cross members have the added anti-chaffing strips.
First piece of the belly pan is cut!!!!  We are moving forward again!