Airstream Restoration of Scott and Kathy's 1955 Flying Cloud Whale Tail - Our California Vintage Airstream.
Showing posts with label POR15. Show all posts
Showing posts with label POR15. Show all posts

Thursday, April 2, 2015

Poor Me. POR me.

With the rust gone and the reinforcement securely welded, the original propane tank holder was painted with POR15 to stop any future rust.  The four lines of rivets securing the hold-down plate will keep the frame attached to the shell for years to come!  I'm so ready to travel in improved 1955 style!  We opted to keep the original style hitch crank.



Saturday, February 1, 2014

Warming Up - Insulating the Belly Pan

Reflectix reflective insulation is cut to fit under the plywood floor between the frame rails including above the water tanks.   It will also be used to insulate under the water tanks.
Note:  The step is painted with a UV resistant topcoat over the black POR 15.
The visible portions of the rails will topcoat painted soon. 

The portions of the frame that are cut out for the plumbing connections - all will be strong!  Each cross member will be strengthened at the bottom with a heavy steel bolt-on bridge.  The bolts will allow access to the plumbing if needed at a later date.


 









The dump valve is installed & valve handles extended through the main rail into an are that will be accessible through a flip down hatch.


 












 Gray tanks installed!


 









Fiberglass Insulation to really keep us warm! 

The end of the cross members have the added anti-chaffing strips.
First piece of the belly pan is cut!!!!  We are moving forward again!

Monday, January 7, 2013

Step Attached to the Frame and Painted

 Our original step - refurbished - with new Slide-A-Way welded to the frame.
The metal on the outside of the cross members will be used to attach the belly pan.
 Painted to prevent rust.
Now I have a way to step into my trailer!  I am so looking to using this step!

Monday, November 26, 2012

Painting and Protecting the Frame with POR-15

First the frame was wire brushed.  Finally the steel was acid washed to remove any remaining rust. The chassis is being painted with POR-15 to prevent any future rust from happening.  Using the rotisserie made this part of the job faster, and is easier on the human body/back.  This POR-15, not original to the vintage Airstreams, should keep our 1955 Flying Cloud traveling down the road on Airstream adventures for years to come.